> For the complete documentation index, see [llms.txt](https://help.mywayroute.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.mywayroute.com/guides/understand-route-settings.md).

# Understand Route Settings

Vehicle, departure time, road restrictions, side of road and optimization mode of a route, and the default route settings

{% hint style="info" %}
**Using MyWay on Android?** This page describes the iOS app version 3. See [Version 2 of How to use MyWay](https://help.mywayroute.com/v2/guides/how-to-use-myway-route-planner).
{% endhint %}

While you plan a route, its settings are shown below the stops, under **Route Settings**. Tap a setting to change it for this route only:

* **Vehicle**: what you drive, for example Car. See [Vehicle Settings](https://help.mywayroute.com/guides/understand-vehicle-settings.md).
* **Departure time**: the route departs now by default. To plan it for later, tap **Depart now**, pick a date and time and tap **Done**. **Clear** switches back to departing now.
* **Road Restrictions**: roads to [avoid](#road-restrictions), such as toll roads.
* **Side of Road**: Any Side, Same Side as Stop or Across from Stop, for all stops in the route.
* **Optimization mode**: [Optimize for Time or Optimize for Distance](#optimization-mode).

Swipe the row to the left to see all settings. A highlighted setting means this route differs from the standard value, for example when you set a departure time or a road to avoid (the vehicle is always highlighted). You can change these settings only while you plan the route; after you start it, they're hidden.

**Route settings are very important and can dramatically change your route time, distance and the way it looks.** Take some time to experiment with them, because there is no one-size-fits-all solution.

<figure><img src="https://767845864-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F1McHbbCe36hw1kDZIHBs%2Fuploads%2Fgit-blob-b80d624b0a3b23f42049f2cd7bdd9deb6091bee1%2Fhow-to-use-route-settings.png?alt=media" alt="" width="188"><figcaption><p>Route Settings</p></figcaption></figure>

{% hint style="info" %}
**A tip from us:** you can plan a route in advance. Set the departure time, and MyWay calculates the ETAs from it. After you tap **Start Route**, the start location stays the current step with its own **Start Route** button. Tap it only when you actually leave: MyWay marks the start as done and recalculates all ETAs from that moment. This keeps your ETAs accurate and the traffic data up to date.
{% endhint %}

## Default Route Settings

If you use the same settings for most routes, make them the default. The first button in the row (with two switches) opens the default **Route Settings**, which MyWay applies to new routes:

* vehicle, side of road, optimization mode and road restrictions;
* **Time at Stop**: the default time for new stops;
* **Start & End Locations**: the default start and end for new routes.

Tap the check mark to save. MyWay also applies the new defaults to the current route, but only to the settings you haven't changed for this route. For example, if your default vehicle was Car and you change it to Van, a route that still uses Car becomes Van, while a route where you chose Truck yourself stays Truck.

## Optimization Mode

**One of the most impactful settings for route planning is Optimization Mode**, which offers two options: **Optimize for Time** and **Optimize for Distance**. This setting affects both the optimized route and the order of your stops.

**Optimizing for time is recommended in 90% of cases.** It works similarly to most navigation apps, focusing on efficiency rather than the shortest path. While the route might be slightly longer in distance, it's typically faster, more fuel-efficient and more convenient. These routes usually involve fewer turns, traffic lights and route changes.

Optimizing for distance prioritizes the shortest possible route, even if it sacrifices time and convenience. Routes optimized this way often include more turns, traffic lights and unpaved roads. While it's less practical for most users, it can be useful for drivers who know the area very well.

## Road Restrictions

Road restrictions let you avoid highways, ferries, toll roads or unpaved roads.

* **Highways**, **Ferries** and **Tolls**: MyWay avoids these roads where it can. Some of them might be necessary to complete the route; then MyWay keeps their use to a minimum.
* **Unpaved Roads** is a strict rule. For Car, Van, Small Truck and Truck, MyWay uses an unpaved road only at the start or end of the way between two stops, never in the middle. A stop that can't be reached this way gets "Route not found" and is left out of the route. For Bicycle, this option only steers the route away from rough surfaces; Pedestrian routes ignore it.

{% hint style="info" %}
**Turn off Unpaved Roads only when a stop shows "Route not found".** That stop may have no paved road to it. See [Unpaved Roads restriction](https://help.mywayroute.com/faq/why-do-some-of-my-stops-have-issues-path-not-found-or-unexpected-error.md#unpaved-roads).
{% endhint %}

{% hint style="warning" %}
MyWay doesn't pass road restrictions to navigation apps. Set the same options in your navigation app, otherwise it may lead you along the roads you wanted to avoid.
{% endhint %}
